Keep the chain as close to the bottom of the jack as possible to prevent the jack from being pulled forward or from slipping off once you start jacking it up. Now, wrap the tail of the chain around the nose of the high lift jack.
Demolish of the chain link fence:
How to remove chain link fence post with car jack. Lay the chain fence fabric. Place the loose dirt on a burlap or plastic bag for easier cleanup. You may have to dig 12 to 24 inches into the ground.
Cut the tie wires between the extension bar and the fence wire mesh. I had half a dozen concrete posts that used to be part of a chain link fence between me and my neighbour. With one hand, keep the jack.
Wrap chain around 2×6 and using a cordless drill, screw lag bolts through chain into broke off fence post. Ratchet jack until the post is pulled completely out of the ground. Raise jackstand to keep level with jack.
Although spraying it might give you a good finish, it can be difficult to control the overspray. Pull the top of the post to you while jack hook up. Wrap a chain around the post and use a high lift jack to pull the post out.
The innovative design allows you to apply a tremendous amount of lifting force directly on the post, lifting it straight out of the ground. If there are any fence ties attached to the fence posts, loosen those as well. Put on a pair of heavy leather gloves and stand to the side of the jack's handle.
One was wrap heavy chain around post a few times as close to ground as you can get it, (wood, metal, didn't matter), place the hook so the chain had a loop, place tongue of jack in the loop with the jack on solid ground or 2x something block of sturdy wood, pump the jack and it's out. You’ll want to push the chain as close to the base of the jack as possible so it doesn’t pull the jack forward or slip off once you start jacking it up. Vevor post puller 42 long chain fence post puller 32 standing frame wood post puller set with lifting chain puller stump puller fence post remover for round fence post, metal, sign post & tree stump.
With the remainder of the chain in hand, securely connect it to the top of the jack. If they are large or very heavy a bobcat and some chain can usually pull them out, especially if you soak the ground around them thoroughly. Dig down a few inches and screw into the side of the post to pry it out with a lever and fulcrum.
Unscrew the bolts of the corner clamps which connect the fence post with the tension bar. Dig around the post, removing all the dirt surrounding the base. The trick to removing a fence post is to apply force upward, so that you're not fighting the strength of the earth on either side of the buried post.
If the concrete is smooth you may need to place some. Screw lag bolts through a chain into the broken off fence post and then use a vehicle winch/come along/high lift jack to pull the post out. Then, use the grab hook to latch the chain to itself and lock it around the jack.
Cut the tie wires between the fence posts and the fence wire mesh. Take the two ends of the chain looped back around and drop them over the bumper hook. Remove the chain from the post.
Lift with jack, stop and raise jackstand to equal height. Get it as soon as thu, aug 19. Operate the jack to lift the chain and gradually tug the fence post up and out of the ground.
Ratchet jack handle, raise bumper hook and pull the chain tight around the post. An old style car bumper jack and some chain to grab the post with often works. Cut the tie wires between the extension wire and the fence wire mesh.
This can be done with a jack or machinery, or with a lever and some elbow grease. Weave the metal bar out from the chain link, then use pliers to remove the fence ties a few at a time. Lift the concrete footing out of the ground.